Skoda Fabia II 2007 Workshop Manual page 120

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
– Remove heat shield for the power-assisted steering control
unit -J500- from the assembly carrier -arrows-.
Note
If required the alignment rail - MP3-457/2 (VW 457)- has to be
adapted ⇒ page 116 .
Adapt alignment rail - MP3-457/2 (VW 457)-
– Fit 2 holes -arrows- ∅ 7 mm on the alignment rail - MP3-457/2
(VW 457)- .
♦ Dimension -a- = 70 mm
♦ Dimension -b- = 48 mm
♦ Dimension -c- = 11 mm
– Screw down alignment rail - MP3-457/2 (VW 457)- with bolts
M6 x 20 -arrows- onto the assembly carrier.
– Position the supporting device for engine - MP3-470 (3300A)-
onto the alignment rail - MP3-457/2 (VW 457)- .
– Carefully press the engine/gearbox forwards via the spindle of
the supporting device for engine - MP3-470 (3300A)-
Note
Observe all cables when displacing the engine/gearbox unit.
116
Rep. gr.37 - Controls, housing