Skoda Fabia II 2007 Workshop Manual page 93

– Remove the centre console and air guide ⇒ Body Work; Rep.
gr. 68 .
– Disconnect plug connection for vehicle wiring harness to se‐
lector mechanism -1-.
Note
Ignore -position 2-.
Caution
Touch an earthed object before working on the electrical com‐
ponents. Do not grab directly at the plug contacts or electronic
components.
– Unlock the plug connection -1- and pull out.
– Unscrew screws -arrow-.
– Undo the mounting bracket with the control unit for automatic
gearbox - J217- from the bearing and remove it upwards and
out.
– Remove battery and battery tray ⇒ Electrical System; Rep.
gr. 27 .
– Lever off the selector lever control cable -3- from gearshift
lever, e.g. using an open-end wrench -1-.
Note
Ignore positions -2-,-4- and -arrows-.
– Unlock the quick-release lock -3- at the mounting bracket -2-
and unhook the selector lever control cable -1-.
– Remove the circlip -5- and release the selector lever control
cable -1- from the support -4-.
Caution
Risk of damage to the selector lever control cable.
♦ Do not press the selector lever control cable out of the
cable support towards the rear. The selector lever control
cable is only guided out of the cable support when remov‐
ing the gearshift mechanism.
♦ Do not bend or buckle the selector lever control cable.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism
89