Skoda Fabia II 2007 Workshop Manual page 57

2.1.7 Summary of components - Gearshift mechanism (Octavia III, Yeti)
1 - Shift mechanism
❑ with selector lever lock
solenoid - N110-
❑ ⇒ "2.14 Emergency re‐
lease of gearshift mech‐
anism out of position P ",
page 105
❑ ⇒ "2.9 Removing and in‐
stalling selector mecha‐
nism", page 74
❑ ⇒ "2.3 Inspecting and
adjusting the selector
lever control cable",
page 55
❑ ⇒ Fig. ""Remove the
shift mechanism togeth‐
er with the selector lever
control cable from the
shift housing"" ,
page 54
2 - Screw
❑ 8 Nm
3 - Shift housing with gasket
❑ ⇒ Fig. ""Remove the
shift mechanism togeth‐
er with the selector lever
control cable from the
shift housing"" ,
page 54
4 - Nut
❑ 4 pieces
❑ 25 Nm
5 - Gearshift lever
6 - Cable support
❑ for selector lever control cable
7 - Screw
❑ for cable support to gearbox
❑ 2 pieces
❑ 23 Nm
8 - Selector lever control cable
❑ The selector lever control cable must not be separated from the shift mechanism Pos. 1, it must be
removed together as one component part ⇒ Electronic Catalogue of Original Parts.
❑ when installing in the vehicle, clamp on the gearbox side with the fixing part to the heat shield of the
exhaust system
❑ Do not grease selector lever control cable
❑ ⇒ Fig. ""Remove the shift mechanism together with the selector lever control cable from the shift hous‐
ing"" , page 54
❑ ⇒ "2.3 Inspecting and adjusting the selector lever control cable", page 55
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism
53