Skoda Fabia II 2007 Workshop Manual page 86

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
– Clip off clips -arrows- and remove heat shield.
For Octavia II and Superb II vehicles up to 10.2011
Note
A second mechanic is needed under the vehicle to remove the
shift mechanism.
– Unscrew nuts -1- and -2-.
– Remove the shift mechanism together with the selector lever
control to the bottom, ensuring the selector lever control cable
does not get bent and kinked.
Note
Shift mechanism can also be replaced without selector lever
♦
control cable, on the following vehicles:
⇒ "2.1.1 Summary of components - Gearshift mechanism -
♦
Octavia II up to 10.2009", page 41
On Superb II, Octavia II vehicles as of production date
♦
11.2009, the selector lever control cable must not be removed
from the shift mechanism and is replaced together as a single
part ⇒ Electronic catalogue of original parts .
⇒ "2.10 Removing and installing the selector lever control ca‐
♦
ble", page 92 .
Removing and installing shift mechanism together with selec‐
♦
tor lever control cable
⇒ "2.9 Removing and installing selector mechanism",
page 74 .
Install
Installation is performed in the reverse order, pay attention to the
following points:
Note
Do not bend or buckle selector lever control cable.
82
Rep. gr.37 - Controls, housing
.