Skoda Fabia II 2007 Workshop Manual page 87

– Insert the shift mechanism and tighten the rear nuts -1- by
hand.
– Mount the strut for centre console -3- onto the shift mechanism
as illustrated in the fig.
– Tighten nuts -1- and -2- to tightening torque.
The fitting together of the plug connection -A- must not be per‐
formed, if the plug connector housing is latched into the shift
mechanism. When fitting together (high resistance because of the
spring) the catch of the plug connector housing breaks off.
– Connect plug -A- and plug connector housing and then latch
into the shift mechanism.
Note
As of production date 11.2009 the shift mechanism is changed,
the 4-pin plug connection -B- and the selector lever lock solenoid
- N110- -1- are already located in the shift mechanism
⇒ "2.1.2 Summary of components - Gearshift mechanism - Oc‐
tavia II as of 11.2009", page 44
– Insert the selector lever control cable -1- in the cable support/
gearbox and carefully push onto the gearshift lever -3-. Do not
bend the gearshift lever, otherwise it will no longer be possible
to adjust the gearshift operation exactly.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
.
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism
83