Skoda Fabia II 2007 Workshop Manual page 82

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
– Remove the shift mechanism with the selector lever control
cable to the top -arrow-, ensuring the selector lever control
cable does not get bent or kinked.
Install
Installation is carried out in the reverse order. When installing,
observe the following:
Note
Do not bend or buckle selector lever control cable.
– Insert the shift mechanism and tighten the rear nuts -1- by
hand.
– Mount the strut for centre console -3- onto the shift mechanism
as illustrated in the fig.
– Tighten nuts -1- and -2- to tightening torque.
For vehicles Fabia II and Roomster up to 10.2011
– Separate plug connections -A- and -B-.
For vehicles Fabia II and Roomster as of 11.2011 and Rapid ve‐
hicles
– Insert screws -arrows- into the shift housing.
– Fit plug connection -A- for the gearshift mechanism.
Continued for all vehicles
Volkswagen Technical Site: http://vwts.ru http://vwts.info
огромный архив документации по автомобилям Volkswagen, Skoda, Seat, Audi
78
Rep. gr.37 - Controls, housing