Skoda Fabia II 2007 Workshop Manual page 105

tavia III, Superb II, Rapid and Yeti vehi‐
cles
The selector lever lock solenoid is integrated firmly in the gearshift
mechanism and cannot be replaced separately. To replace, the
gearshift mechanism must be replaced
2.12.2 Removing and installing selector lever
lock solenoid - N110- for Fabia II and
Roomster vehicles up to 10.2011
Removing
Note
Observe measures when disconnecting and connecting the bat‐
tery ⇒ Electrical System; Rep. gr. 27 .
– Disconnect the battery-earth strap with the ignition off ⇒ Elec‐
trical System; Rep. gr. 27 .
– Removing the cover for the shift mechanism
⇒ "2.5 Removing and Installing the cover for the shift mecha‐
nism", page 58 .
– Remove the centre console ⇒ Body Work; Rep. gr. 68 .
– Pull out connector -A-.
– Remove the pre-exhaust pipe with mounting bracket -1- ⇒
Engine; Rep. gr. 26 .
– Remove underbody cover on right and left -arrows-.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
⇒ page 74
Gearbox 09G - Edition 07.2014
.
2. Repairing shift mechanism
101