Skoda Fabia II 2007 Workshop Manual page 67

♦ Release tool - T30098-
– Apply handbrake.
– Shift selector lever into position "D/S".
– Switch off ignition.
– Fit the release tool - T30098- under the cover for shift mech‐
anism and loosen the cover by pressing it in
-direction of arrow-.
– Swivel the cover for shift mechanism to the side.
– Disconnect the plug of the display unit -arrow A- and the plugs
for the switches mounted on the cover for the shift mechanism
-arrows B and C-.
– Raise cover for shift mechanism.
– Use a screwdriver to press onto the clips of the protective cov‐
er for the selector lever and separate the protective cover from
the cover for the selector mechanism.
– Remove the cover for the selector mechanism via the loose
protective cover and selector lever handle.
Install
Installation is carried out in the reverse order.
2.5.6 Removing and Installing the cover for
the shift mechanism Yeti
Special tools and workshop equipment required
♦ Release tool - T30098-
Removing
– Apply handbrake.
– Shift selector lever to position "N".
– Switch off ignition.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism
63