Skoda Fabia II 2007 Workshop Manual page 81

– Remove heat shield -arrows-.
For vehicles Fabia II and Roomster up to 10.2011
Note
A second mechanic is needed under the vehicle to remove the
shift mechanism.
– Unscrew nuts -1- and -2-.
– Remove the shift mechanism together with the selector lever
control to the bottom, ensuring the selector lever control cable
does not get bent and kinked.
Note
Shift mechanism can also be replaced without selector lever
♦
control cable, on the following vehicles:
⇒ "2.1.4 Summary of components - Shift mechanism up to
♦
10.2011 (Fabia II and Roomster)", page 47
⇒ "2.10 Removing and installing the selector lever control ca‐
♦
ble", page 92 .
Note
♦ For vehicles Fabia II and Roomster as of production date
11.2011 and Rapid vehicles, the selector lever control cable
must not be removed from the shift mechanism and is replaced
together as a single part ⇒ Electronic catalogue of original
parts .
Removing and installing shift mechanism together with selec‐
♦
tor lever control cable
⇒ "2.9 Removing and installing selector mechanism",
page 74 .
For vehicles Fabia II and Roomster as of 11.2011 and Rapid ve‐
hicles
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
.
Gearbox 09G - Edition 07.2014
2. Repairing shift mechanism
77