Skoda Fabia II 2007 Workshop Manual page 132

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
Caution
Touch an earthed object before working on the electrical com‐
ponents. Do not grab directly at the plug contacts or electronic
components.
– Unlock the plug connection -1- and pull out.
– Unscrew screws -arrow-.
– Undo the mounting bracket with the automatic gearbox control
unit - J217- from the bearing and remove it upwards and out.
– Remove battery and battery tray ⇒ Electrical System; Rep.
gr. 27 .
– Lever off the selector lever control cable -3- from gearshift
lever, e.g. using an open-end wrench -1-.
– Disconnect plug connection -4- and expose electrical cable at
bracket -2-.
– Unlock the quick-release lock -3- at the mounting bracket -2-
and unhook the selector lever control cable -1-.
– Unscrew the screws -arrows-, remove the support for the se‐
lector lever control cable -4- and place it to one side.
Note
Do not remove the circlip -5-.
♦
Do not bend or buckle the selector lever control cable.
♦
– Unscrew earth strap -3-.
– Detach electrical cables -1- and -2- at starter and expose.
– Mark coolant hoses of ATF radiator in order to prevent inter‐
changing when installing.
Caution
♦ When the engine is warm, the cooling system is under
overpressure.
♦ Before removing the coolant hoses, cover the cap of the
coolant expansion tank with a cloth and open it carefully.
128
Rep. gr.37 - Controls, housing