Skoda Fabia II 2007 Workshop Manual page 178

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 09G - Edition 07.2014
– Unhook wiring loom at bracket -C-.
Note
In case of damage of the plug connections (depending on the
defective plugs), the wiring loom with 8-pin plug or the gearbox
input r.p.m. sender - G182- or the gearbox output r.p.m. sender -
G195- must be replaced.
– Remove gearshift lever -A- on the gearshift shaft.
Note
Carefully hold the gearshift lever -A- with combination pliers
♦
-B-, so that the torque is not transmitted onto the multi-function
switch - F125- .
Pay attention to the slide valve in the slide valve body, in which
♦
the gearshift lever is engaged, so that it is not damaged.
– Loosen the fixing screws -arrows- of the slide valve body
crosswise and carefully remove the slide valve body.
– Remove the bracket -1- and -2-.
3 - Designation of slide valve body, here e.g. "A2"
174
Rep. gr.38 - Gears, control