Skoda Fabia II 2007 Workshop Manual page 83

– Insert the selector lever control cable -1- in the cable support/
gearbox and carefully push onto the gearshift lever -3-. Do not
bend the gearshift lever, otherwise it will no longer be possible
to adjust the gearshift operation exactly.
– Hang the selector lever control cable -1- in the clip -arrow- at
the gearbox. When installing the selector lever control cable,
respect a minimum distance of at least 5 mm from the ATF
cooler.
– Clamp the selector lever control cable on the gearbox side with
the fixing part to the heat shield of the exhaust system.
– Install exhaust system and align free of stress ⇒ Engine; Rep.
gr. 26 .
– Installing the selector lever handle and cover for the shift
mechanism:
♦ ⇒ "2.6 Removing and installing and installing selector lever
handle up to 10.2012", page 65
♦ ⇒ "2.7 Removing and installing selector lever handle as of
11.2012", page 70 .
– Check the function of the ignition key anti-removal lock
⇒ "2.4 Check the function of the ignition key removal lock",
page 57 .
– Setting selector lever control cable
⇒ "2.3 Inspecting and adjusting the selector lever control ca‐
ble", page 55 .
– Inspect gearshift mechanism
⇒ "2.2 Inspecting the gearshift mechanism", page 54
– Install air filter ⇒ Engine; Rep. gr. 24 .
– Connect earth strap of battery ⇒ Electrical System; Rep. gr.
27 .
Note
If the battery earth strap is disconnected and connected, carry out
additional operations ⇒ Electrical System; Rep. gr. 27 .
Tightening torques
Summary of components - Shift
mechanism (Fabia II and Room‐
ster) up to 10.2011
Summary of components - Shift
mechanism (Fabia II and Room‐
ster) as of 11.2011
Summary of components - Gear‐
shift mechanism (Rapid)
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
.
⇒ "2.1.4 Summary of com‐
ponents - Shift mechanism
up to 10.2011 (Fabia II and
Roomster)", page 47
⇒ "2.1.5 Summary of com‐
ponents - Shift mechanism
as of 11.2011 (Fabia II and
Roomster)", page 49
⇒ "2.1.6 Summary of com‐
ponents - Gearshift mecha‐
nism (Rapid)", page 51
Gearbox 09G - Edition 07.2014
.
2. Repairing shift mechanism
79