Invert Setpoint - Siemens SINAMICS G120D Series Operating Instructions Manual
Distributed converter, control units cu240d-2 with encoder evaluation.
Hide thumbs
Also See for SINAMICS G120D Series:
- List manual (910 pages) ,
- Operating instructions manual (398 pages) ,
- Original instructions manual (382 pages)
Table of Contents
Advertisement
7.4.2
Invert setpoint
The inverter provides an option to invert the setpoint sign using a bit. As an example, the
setpoint inversion is shown through a digital input.
In order to invert the setpoint through the digital input DI 1, connect the parameter p1113
with a binary signal, e.g. the digital input 1.
Table 7- 12
Parameter
p1113 = 722.1
p1113 = 2090.11
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
Examples of settings to invert the setpoint
Remark
Setpoint inversion
Digital input 1 = 0: Setpoint remains unchanged.
Digital input 1 = 1: Inverter inverts the setpoint.
Invert setpoint via control word 1, bit 11.
Advanced commissioning
7.4 Setpoint calculation
137
Advertisement
Table of Contents
