Using A Function Associated With Digital; Input And Via Serial - gefran GFX4 Configuration And Programming Manual

USING A FUNCTION ASSOCIATED WITH DIGITAL

INPUT AND VIA SERIAL

At power-on or on the leading edge of digital input 1 or 2, all zones assume the state set by the digital input. For each
zone, this state can be changed by writing via serial.
The setting via serial is saved in eeprom (STATUS_W_EEP, address 698).
State A/B
AUTO/MAN controller
LOC/REM setpoint
SP1/SP2 setpoint
ON/OFF software
STOP/START selftuning
STOP/START autotuning *
* continuos or one-shot
A
B
STATE OF DIGITAL
INPUT
22
Setting
dIG. or dIG.2
1 word 305
2 word 305
5 word 305
6 word 305
8 word 305
9 word 305
A
B
STATE OF A/B
SERIAL zone 1
A
B
STATE OF A/B
SERIAL zone 2
A
B
STATE OF A/B
SERIAL zone 3
A
B
STATE OF A/B
SERIAL zone 4
Address for writing via serial
Access at 16 bits
bit 4
bit 6
bit 1
bit 3
bit 2
bit 5
LEADING EDGE OF DIGITAL INPUT
or at POWER-ON
SERIAL WRITING
STATE A/B zone 1
SERIAL WRITING
STATE A/B zone 2
SERIAL WRITING
STATE A/B zone 3
SERIAL WRITING
STATE A/B zone 4
880397M_MSW_GFX4-GFXTERMO4_08-2018_ENG
Access at 1 bit
bit 1
bit 10
bit 75
bit 11
bit 3
bit 29
STATE OF A/B
zone 1
STATE OF A/B
zone 2
STATE OF A/B
zone 3
STATE OF A/B
zone 4