Standards And Directives; Contact Information - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

Pos. Marking
10 Power of traveling motor
11 Manufacturing date
12 Empty space
13 Hoist duty class
14 Lifting height
15 Rated input of hoisting motor
16 Rated input of traveling motor Rated input of current to the traveling motor in amperes
17 Fuse
18 Manufacturer reference
19 Fault current information
20 Traveling speed
21 Hoisting speed
22 Chain type
23 Manufacturer
24 Electrical information
25 Trolley type
26 Motor duty rating
27 Reeving
28 Designation of series or type
29 Product type
The example data in the figure is shown for illustration purposes only and does not
NOTE
necessarily match the data of your product.
1.2.4

Standards and directives

This product has been designed and manufactured to conform to European and international
standards and directives.
The product also fulfills the requirements of the following standards (if applicable): CSA, UL,
OSHA, CCC
Declaration of conformity and other certificates are included in the delivery package.
Manufacturer reserves the right to modify the design and material specifications without
NOTE
prior notice.
1.3

Contact information

Contact the manufacturer's local representative or
Verlinde S.A.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
Description
Power output of the traveling motor
Manufacturing day/month/year
Hoist duty class according to standards
Maximum height of the lifting motion
Rated input of current to the hoisting motor in amperes
Rating of the fuse for the main power supply
Sales order number
Suitable for use on a circuit capable of delivering not more than 5 kA
RMS symmetrical amperes (SCCR 5 kA)
Highest and lowest traveling speed
Highest and lowest hoisting speed
Diameter and pitch of the chain used
Name and full address of the manufacturer
Rated input in main voltage, control voltage, frequency, number of
phases (1 or 3 phases)
Type of the trolley used in the product
A ratio of motor on-to-off time with the stated temperature
Number of falls
Product type code
Designation of the machinery
1 INTRODUCTION
6/2020