Removing And Installing The Hoist Covers - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

4.5

Removing and installing the hoist covers

1. Make sure that you have disconnected the chain hoist from the main power supply network.
2. To access the components on the brake side, loosen the four screws of the end cover on
the brake side. Remove the end cover.
3. To access the components on the motor side, loosen the four screws of the end cover on
the motor side. Remove the end cover.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
4 INSTALLATION
6/2020