Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual page 88

10. Remove the brake carefully.
11. Install the new brake on the shaft.
Secure the fixation with the three screws.
12. Lead the brake cable through the hoist
frame. Pull the brake cable carefully out on
the motor side.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
7 MAINTENANCE
6/2020