Lubrication Points; Lubricant Information - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

7.7.3

Lubrication points

Figure 23. Lubrication points of the chain hoist
Pos.
1
2
Only lubricate the instructed components. Other components are lubricated for the
NOTE
design working period of the product.
7.7.4

Lubricant information

1 Hoisting gear
Lubricated with oil. Lubrication lasts for the design working period of the product.
Standard lubricant
Installation
Factory installed
If you must add lubricant for the hoisting gear, see the following table for the correct fill amount.
Frame size
05
10
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
Component
Hoisting gear
Chain
Trade name and number
Mobil ATF 320
Quantity [l]
Intervals
Lubricated for the design working period
of the product
From 1 week up to a year (depending on
the usage)
Quantity
Lubricated for the design working
period of the product
0.23
0.6
OWNER'S MANUAL
Quantity [pt]
0.49
1.27
6/2020