Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual page 62

• If the load is unstable, it can exert a sudden force on the chain. Fasten the contents of the
packing cases securely, so that they cannot move around during lifting.
• Sudden loss of the load can cause the trolley or hoist to jump.
OVERLOAD HAZARD
NOTICE Shock loading could damage the product or the load.
Avoid shock loading the product.
WARNING! MACHINE MALFUNCTION HAZARD
Any usage of defective equipment could cause serious injury, death, or damage to the
equipment.
After a shock load, authorized service personnel or an experienced service technician
who is authorized by the manufacturer must check the equipment and make sure that it
is safe to use. Do not use the equipment before it has been checked and declared as
safe to use.
Attaching the load
The load is attached to the product with some kind of non-fixed load-lifting attachment. The
most common non-fixed load-lifting attachments are chains, wire rope slings, and lifting belts.
The operator must select a lifting device that is designed for the product to be transported.
Always follow the instructions provided by the lifting device manufacturer when using
NOTE
non-fixed load-lifting attachments. Never use the chains of the product as a sling to
attach to the load.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
6 OPERATION
6/2020