Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual page 35

Figure 10. 4-step rotating geared limit switch
The 4-step rotating geared limit switch has a similar operating function as the 2-step geared
limit switch, but provides four separately adjustable switching units. There are several
configuration possibilities for this feature, but the configuration 1 (see table 4-step geared limit
switch) is the standard configuration.
Rotating geared limit switch configurations
2-step geared limit switch
Config.
1
2
1) Standard configuration.
2) The switches X3A and X4A are electro-mechanical limit switches that are installed on the
chain guide. They are activated mechanically when touched by the buffer of the hook.
4-step geared limit switch
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
GLS type
Limit switch safety UP stop
2-step GLS +
Limit switch safety DOWN stop
microswitch or
magnetic limit
Limit switch working UP stop
1)
switch
Limit switch working DOWN stop
Limit switch UP stop
2-step GLS +
Limit switch DOWN stop
microswitch or
magnetic limit
Slow speed UP
switch
Slow speed DOWN
Description
OWNER'S MANUAL
Switch unit
2)
Switch X3A
2)
Switch X4A
GLS UP 1
GLS DOWN 1
2)
Switch X3A
2)
Switch X4A
GLS UP 1
GLS DOWN 1
6/2020