Table of Contents
Advertisement
4
INSTALLATION
4.1
General instructions for installation
4.2
Safety during installation
1.
Ensure that the installation personnel are professionally competent, qualified, and are
provided with adequate instructions for carrying out the work.
2.
Ensure that the test loading, test drive, and commissioning have been executed properly.
Check that the handover log has been completed properly.
3.
Ensure that components, electrical connections, and steel structures of the product have
been inspected and certified as defect-free.
4.
Check with your supplier that you have received all the relevant documents for the product
delivery. Check that the documents correspond to the product you have received.
5.
Ensure that tools and equipment are available for installation, in accordance with the sales
contract. To prevent objects from falling when working in high places, use proper safety
equipment.
6.
Ensure that sufficient time has been reserved for installation and testing.
7.
Prevent unauthorized persons and bystanders from walking on or below the work site.
Components or tools may fall and result in injuries. To prevent injuries from falling
components or tools, ensure that the secured area is spacious enough.
8.
Ensure that there is no possibility for personnel or body parts to be struck, crushed, or
compressed by moving machinery:
• Secure the area so that installation personnel are not at risk from the movements of
machines, automatic doors, or adjacent cranes at the installation site.
• Ensure that machinery and equipment cannot start accidentally or move during
installation and maintenance phases.
• To reduce the risks, maintain sufficient space in the operating area.
• To prevent entrapment, shield moving parts with guards.
• Never override any safety devices.
• Be prepared in case equipment moves in the wrong direction during testing.
9.
Check that the supply voltage and frequency match the requirements of the equipment.
Check that the installed busbars are suitable for the equipment.
10. Before allowing the equipment to be used for normal operation, ensure that all safety
devices have been restored to their full operational status. Safety devices may have been
bypassed for testing purposes. Never bypass a safety device for normal operation.
11. Ensure that the operating environment and space that is reserved for the equipment is
suitable for all functions of the product.
12. Immediately following installation and before commissioning, check that the supplied parts
conform to the drawings, instructions, parts lists, and structural measurements. Discuss
any non-conformance with the supplier immediately.
13. Items which are not properly secured to the equipment, such as tools or detached
components, could move or fall accidentally, with potentially serious consequences. When
dismantling the equipment, lower the components to the ground at the earliest practical
opportunity.
14. Check for any electrical hazards in and around the operating area and take appropriate
steps to minimize them. Only properly trained personnel may perform electrical work on
the product and they must use safe methods always.
15. If there is a need for welding to be done at the site, provide suitable fire extinguishers. Do
not allow any of the product structure or components to be used for grounding.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
OWNER'S MANUAL
6/2020
Advertisement
Table of Contents
Need help?
Do you have a question about the STAGEMAKER SL5 504 M2 B D8+ and is the answer not in the manual?
Questions and answers