Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual page 84

For more information, see chapter Removing and installing the hoist covers.
4. Check that the brake data of the
replacement brake matches with the data
of the original brake.
You can find the brake data in the sticker
that is attached to the brake.
5. Unplug the brake cable (1) from the control
board.
6. Remove the three screws that hold the
brake in place.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
1
7 MAINTENANCE
6/2020