Log Book - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

Annual inspections of the electrical components
Component
Main isolation switch
Wiring
Contactors
Fuses
Annual inspections of the motors and brakes
Component
Motors
Brakes
Annual inspections of the mechanical components
Component
Chain sprocket
Chain guide
Chain bucket
Bearings
Load carrying structure
Annual inspections of the control devices
Component
Pendant controller
The product may have options which also require inspection. Make sure that all
NOTE
components are inspected.
7.3.7

Log book

The log book is supplied in the interest of accident prevention. It is a part of the product, and
must be kept up-to-date and together with the equipment at all times. Do not remove or discard
any parts of the log book. The log book records the complete maintenance history of the
product. The log book must be handed over to the new owner, if the ownership of the product
changes.
The owner (who has the primary responsibility), operators, and service personnel must
NOTE
ensure that the log book is kept up-to-date.
The log book consists of the following items:
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
Objective
Check the condition and operation of the main isolation switch.
Check the condition of the wiring and the connections.
Check the condition and operation of the contactors.
Check the condition of the fuses. For instructions, see chapter Replacing
the control voltage fuse.
Objective
Check the operation of the motors.
Check the operation and wearing of
the brake.
Objective
Check the condition of the chain sprocket. With two-fall hoists, also check
the return sprocket.
Check the condition of the chain guide.
Check the fixing and the condition of the chain bucket.
Check the greasing of the return sprocket bearing.
Check the condition of the bolted joints and load carrying structures.
Check the condition and mounting of the securing components.
Objective
Check the condition and functionality of push buttons and switches.
7 MAINTENANCE
Reference
For instructions on how to check the
brake wear, see chapter Checking
the brake lining.
6/2020