Rotating Geared Limit Switch - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

Hide thumbs Also See for STAGEMAKER SL5 504 M2 B D8+:
Table of Contents

Advertisement

1. Place the manual brake release lever (1)
on the brake (2).
Insert one arm of the lever into the brake
gap (3) on the left side of the upper screw
(4).
2. Turn the manual brake release lever so
that its second arm fits into the brake gap
on the opposite side of the brake.
3. Tilt the manual brake release lever in the
brake gap. Press the lever carefully to
open the brake.
Do not open the brake for more than one
(1) second before stopping again.
4. Repeat the procedures for pressing the
lever and lowering the load within short
intervals.
3.5.2

Rotating geared limit switch

The rotating geared limit switch is available as a 2-step or 4-step version. The rotating geared
limit switch option is available only for the chain hoist configuration B.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
OWNER'S MANUAL
4
3
2
1
6/2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STAGEMAKER SL5 504 M2 B D8+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Stagemaker 100618073

Table of Contents