After Commissioning - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

• Check that the hoisting brake operates correctly in both upward and downward directions.
The braking distance is normal when it is two chain links or less.
4. Check the motor current
• Check the motor current at each phase during the lifting and lowering motion with the
rated capacity. The current should be in balance in all phases, and it may not exceed the
ratings for the motor. Check the current with both hoisting speeds.
5. Check the running temperature
• If the thermal protection halts the lifting or lowering movement prematurely, identify the
reason for the overheating before continuing the commissioning tests.
6. Check the slipping clutch operation
• Check that the slipping clutch mechanism works correctly. When the torque that is caused
by the load exceeds the designed lifting limit (110% [EUR], 125% [US, CH]), the slipping
clutch discs should begin to slip. When the slipping clutch discs slip, they prevent the
lifting movement.
• Local regulations state the maximum values for the load that can be lifted. Follow the local
regulations. Maximum limit for the load that should not be lifted in any case is 1.6 x the
rated capacity.
5.4

After commissioning

• Check visually that the hoist or any other part has not been damaged in any way during
commission testing.
• Check that all tools and materials that are used during installation are removed from the hoist
and track.
• Ensure that the hoist operator and supervision personnel are aware of the need for user
training.
Authorized service organization of the hoist manufacturer can arrange user training by
separate agreement.
• Check the documents delivered with the hoist.
Ensure that entries in the documents are properly recorded. Check that the reference data in
the documentation matches the data on the data plates.
• Compile a commissioning log for the hoist and store it together with the other documentation
for the hoist.
Local requirements may demand other commissioning testing to be performed before
NOTE
the product can be used. Make sure all the local requirements are fulfilled.
NOTE All optional features must be tested before using the product.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
OWNER'S MANUAL
6/2020