Quarterly Inspections; Annual Inspections - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

General monthly inspections
Component
Chain
Limit switch activator
Slipping clutch
7.3.5

Quarterly inspections

The quarterly inspection items include the same check-ups as the daily (see chapter Checks
before operating) and the monthly inspections. The quarterly inspections also include the
following inspections:
General quarterly inspections
Component
Suspension part
7.3.6

Annual inspections

The annual inspection items include the same checks as the daily (see chapter Checks before
operating), monthly, and quarterly inspections. The annual inspections also include the following
inspections:
General annual inspections
Component
Hoist
Chain
Rubber parts
Stickers and markings
Instructions and log books
Annual inspections of the limiting devices
Component
Buffers
Slipping clutch
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
Objective
Check the overall condition and the lubrication of the chain.
Check the condition of the limit switch activator. Check the function of the
upper and lower mechanical limit switches by raising and lowering the
hook.
Check the operation of the slipping clutch. Use the ChainQ tool or see the
instructions in chapter Adjusting the slipping clutch.
Objective
Check the suspension part for nicks, gouges, deformations, or wear.
Objective
Check the condition of the fixing of
the covers.
Measure the wear of the chain (if the
hoist is in continuous use, check the
wear of the chain more frequently).
Check the condition of the rubber
pad in the idle end of the chain
(inside the chain bag).
Check the condition and readability
of the warning and other stickers.
Check the readability of the
instructions. Check the validity of the
log book.
Objective
Check the condition of the buffers and the end stops of the buffers.
Check the operation of the slipping clutch. Use the ChainQ tool or see the
instructions in chapter Adjusting the slipping clutch.
OWNER'S MANUAL
Reference
For instructions on how to measure
the chain wear, see chapter
Inspecting the wear of the chain.
6/2020