Personnel Requirements; Environmental Information; Product Life Cycle Stages - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

When the distance between the operating location and the hoist and associated moving
components is more than 5 m (16 ft), the average combined sound pressure level due to the
hoist and its associated components does normally not exceed 65 dB(A) at the operating
location. The sound pressure level rises as the operator moves closer to the sources of noise.
The sound pressure level can exceed 65 dB(A) if, for example:
• Operator operates the hoist from somewhere close to the moving components
• Crane or building structures resonate heavily
• Walls or other surfaces at the working site reflect noise towards the operator
• Optional warning devices are functional
Measured sound levels
The sound pressure level and volume measurements in the operator station have been
performed according to ISO EN 11201.
The A-weighted sound pressure level at the
operator station (during operation)
The estimated uncertainty for determination of A-weighted sound pressure levels and sound
power levels (standard deviation of the reproducibility of the measurements) is 4 dB (ISO
4871-1996).
2.7

Personnel requirements

SPECIALIST SKILLS REQUIRED
Incompetent operation and maintenance procedures could cause death or severe
injuries.
Operation and maintenance procedures require professional skills and special training
regarding the tasks and working methods.
Do not operate the equipment or do any maintenance tasks without proper training.
Always follow the instructions. Use appropriate personal protective equipment,
depending on the task.
To avoid hazardous situations and dangerous consequences, leave all operation and
maintenance work to professionals. The tasks that are mentioned here are examples of tasks
which are allowed only for trained personnel. More details on the risks that are related to the
tasks can be found in the chapters where the procedures are instructed. The instructions also
contain information on how to carry out the tasks safely. Tasks that require special technical
skills and training include, but are not limited to, electric system maintenance.
2.8

Environmental information

Environmental impacts have been taken into account in designing and manufacturing this
product. To prevent environmental risks during use, follow the instructions and local regulations
for disposal of waste material. Proper use and maintenance improve the environmental
performance of this product.
2.8.1

Product life cycle stages

Product life cycle stages include:
• Production of materials and components
• Equipment manufacturing and assembly
• Use phase, including maintenance and modernization
• Dismantling and recycling of waste materials
• Deliveries between each stage
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
LpA 65 dB or below
WARNING
OWNER'S MANUAL
6/2020