Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual page 56

The motor runs at one of two preset speeds corresponding to the force that the operator applies
to the direction control push button. When you press the direction control push button half-way
down, the motor runs at its slowest speed. When you press the direction control push button
fully down, the motor runs at its maximum speed. When you release the direction control push
button, the motor stops running.
EP (Electronic Potentiometer) push button control
Released (stop):
The device does not move or if it
1
moves already, it decelerates to a
complete stop.
Step 1 (slow or maintain):
If you press the push button half-way
down (step 1), the device accelerates
until it reaches the preset slow speed.
2
If you press the push button half-way
down (step 1) when the device moves
above the preset slow speed, the
motor maintains its current speed
without accelerating or decelerating.
Step 2 (accelerate):
The device accelerates continuously
3
until you release the push button or
reach the maximum speed.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
6 OPERATION
6/2020