Lubrication; Safety During Lubrication; General Lubrication Instructions - Verlinde STAGEMAKER SL5 504 M2 B D8+ Owner's Manual

• Check the condition visually during the annual inspection.
• Check the wear.
• Check for damage, cracks, and tears.
7.7

Lubrication

7.7.1

Safety during lubrication

• Familiarize yourself with the information on the safety data sheet of each lubricant. The safety
data sheet contains instructions on safe handling and risks that are related to the use of the
lubricant. The safety data sheet also includes information on handling the lubricant as waste
material. The manufacturer of the lubricant provides the safety data sheet for the lubricant.
• Handle the lubricants carefully. Prevent leakages to waters, sewers, cellars, and other
enclosed areas.
• Keep the lubricants away from heat and open fire. Do not smoke near the lubricants.
• Avoid skin contact with the lubricants. Wear safety gloves and safety goggles when handling
lubricants. Wash your hands thoroughly after the lubrication.
• Keep the lubricants away from food and drink. Do not inhale any fumes or swallow lubricants.
• Handle used lubricant as hazardous waste according to local legal requirements. Store used
lubricants in containers that are suitable for the purpose. Dispose of used lubricants at a
licensed facility.
7.7.2

General lubrication instructions

The bearings in this product are lubricated for the design working period of the
NOTE
equipment. Under normal operating conditions, there is no need to add lubricant to the
bearings.
The following points give you advice on the lubrication procedures. Follow the instructed
lubrication procedures.
• Using a low grade or incompatible lubricant can damage the gearing or the bearings. Use only
lubricants that are recommended by the manufacturer of the product. For more information,
see chapter Lubricant information. Only use fresh lubricants. Do not mix different kinds of
lubricants.
This product may have a synthetic lubricant that is installed as lubricant at the factory.
NOTE
For more information, see the order confirmation.
• Specified lubrication intervals apply in favorable conditions and normal use. If the product is
used in more demanding conditions or in heavy use, you may have to lubricate the product
more frequently.
Do not use the lubricant excessively. Excessive lubrication can damage the product and
NOTE
its components.
This document and the information contained herein, is the exclusive property of Verlinde S.A.S and represents a non-
public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or
otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A.S. Copyright 2020
© Verlinde S.A.S. All rights reserved.
7 MAINTENANCE
6/2020