Table of Contents
Advertisement
JetMove 203-230
2.4
2.5
Warning
Jetter AG
Checking the Installation
Check motor and servo amplifier wiring and connections by means of
the connection diagrams used.
Check the holding brake, if existing, for proper functioning.
Check to see whether all necessary protection measures against
accidental contact with live or moving parts have been taken.
Carry out any other checks specific to, or required, for your system.
Notes on Safety as regards the
Installation
HAZARD caused by high operating voltage and electric
shock!
Extremely hazardous voltages of up to DC 480 V may
occur!
Please observe the following precautions in order to avoid muscle cramps, burns,
unconsciousness, respiratory standstill, etc., and death:
Have installation and maintenance jobs carried out by qualified personnel
only, see chapter 1.1.3 "Who may operate the servo amplifier JetMove
203-230?", page 10.
Switch off the operating voltage.
Consider the warnings of residual dangers in chapter 1.3.2 "Hazards after
POWER is turned OFF", page 17.
Before carrying out installation and maintenance jobs, separate the servo
amplifier JetMove 203-230 and all connected devices from the mains (pull
out the mains plug).
2.4 Checking the Installation
25
Advertisement
Table of Contents
