Ethernet Interface (Option); Operating Principle; Description Of Connections - Jetter JM-206-230 User Manual

JetMove 206B-230
12
12.1
For the digital servo amplifier JetMove 206B-230, an optional integrated Ethernet
interface can be ordered (article designation of the device: JM-206B-230...-OEM).
This allows for the JetMove 206B-230 to be addressed by the controller via Ethernet
instead of system bus.
12.2
The digital servo amplifier JetMove 206B-230...-OEM is connected with the Ethernet
by a RJ45 socket (X71).
There are two types of interconnecting cables used for 10/100 MBit/s twisted pair
Ethernet.
•
•
Jetter AG

Ethernet Interface (Option)

Operating Principle

1 Ethernet interface
10-pin DIP switch for the lower 8 bits of
the IP address and of various operating
modes
LED for status indication

Description of Connections

Straight-through twisted pair cable
Crossover cables (transmitting and receiving lines are crossed)
Functional Equipment
10/100 MBit/s, TX
RUN / STOP / LOAD
RUN / ERR
12 Ethernet Interface (Option)
87