Display Language; How To Select The Language - Fuji Electric Time Delta-C FSV-2 Instruction Manual

4.5.1. How to select the language

Description
 Indication language (English, Japanese, German, French, Spanish) is selectable.
Setting contents
English (default setting), Japanese, German, French, Spanish
For actual keying, refer to the typical operation indicated below. Set the protection to OFF beforehand. (See Section 4.4.1.)
Operation Select English for the display language.
(example)
Key operation
Press the
▼
Press the
ENT
▼
Press the
▼
Press the
ENT
▼
Press the
▼
Press the
ENT
▼
▼
▼
▼
Press the
ESC
Operation Select Japanese for the display language.
(example)
Key operation
Press the
▼
Press the
ENT
▼
Press the
▼
Press the
ENT
▼
Press the
▼
Press the
ENT
▼
▼
▼
▼
Press the
ESC

4.5. Display language

Description
key for 4 times to display "MAINTENANCE MODE".
key once to display "RAS INFORMATION".
ENT
key for 8 times to display "SYSTEM LANGUAGE".
key once to blink on the 2nd line.
ENT
key for 4 times to display "ENGLISH".
key once to register.
ENT
――― English has been registered. ―――
key or the key to display the measurement mode.
ESC
Description
key for 4 times to display "MAINTENANCE MODE".
key once to display "RAS INFORMATION".
ENT
key for 8 times to display "SYSTEM LANGUAGE".
key once to blink on the 2nd line.
ENT
key for 4 times to display "JAPANESE".
key once to register.
ENT
――― Japanese has been registered. ―――
key or the key to display the measurement mode.
ESC
-24-
Display
MAINTENANCE MODE
RAS INFORMATION
0000000000000000
SYSTEM LANGUAGE
JAPANESE
SYSTEM LANGUAGE
JAPANESE
SYSTEM LANGUAGE
ENGLISH
SYSTEM LANGUAGE
 COMPLETE 
↓
SYSTEM LANGUAGE
ENGLISH
0.000 m/s
0.000 m3/h
Display
MAINTENANCE MODE
RAS INFORMAITION
0000000000000000
SYSTEM LANGUAGE
ENGLISH
SYSTEM LANGUAGE
ENGLISH
SYSTEM LANGUAGE
JAPANESE
SYSTEM LANGUAGE
 ﾄｳﾛｸ 
↓
ｹﾞﾝｺﾞ (LANGUAGE)
ﾆﾎﾝｺﾞ (JAPANESE)
0.000 m/s
0.000 m3/h