Fuji Electric Time Delta-C FSV-2 Instruction Manual page 35

Press the
ENT ENT
▼
――― Outer diameter has been registered. ―――
▼
▼
▼
Press the
▼
Because PVC (factory set) is already registered, go to the next step.
Note) If the pipe is made of another material, press
a corresponding menu by the
Press the
▼
Press the
ENT ENT
▼
Move the cursor by the
▼
key.
Operated to compose "7" because, from Piping data in Section 7.4., the
wall thickness of polyvinyl chloride pipe (tap water size) is 7.0mm.
Press the
ENT ENT
▼
▼
――― Wall thickness has been registered. ―――
▼
▼
Press the
▼
"NO LINING" (factory set) is already registered. Because there is no
lining, go to the next step.
Note) If lining is provided, press the
material or enter the sound velocity. Further, go to "LINING
THICKNESS", and input a lining thickness. Nothing is indicated in
case of "NO LINING".
Press the
▼
"WATER" (factory set) is already registered, go to the next step.
Note) If fluid to be measured is other than water, press the
select the menu or enter the sound velocity.
Press the
▼
Input the kinematic viscosity of the fluid to be measured.
Because the kinematic viscosity 1.0038E
already registered, go to the next step.
In case of fluid other than water, input the kinematic viscosity at a
measurement status of fluid to be measured referring to data in Section
7.4., etc.
Press the
ESC ESC
▼
"S=31" is indicated on the 2nd line.
After mounting the frames on piping, insert into it 2 sensor units spaced
at 31 divisions.
Press the
ESC ESC
measurement mode.
key once to register the outer diameter.
key once to display "PIPE MATERIAL".
key.
key once to display "WALL THICKNESS".
key once to blink the cursor.
key, and change the numeric value by the
key once to register the wall thickness.
key once to display "LINING MATERIAL".
key and
ENT
key once to display "KIND OF FLUID". Because, also,
key once to display "VISCOSITY".
-6
[m
key once to display "PROCESS SETTING".
key once and the key twice to return to the
key, and select
ENT
key to select the
key, and
ENT
2
/s] of water at 20°C is
-27-
OUTER DIAMETER
 COMPLETE 
↓
OUTER DIAMETER
114.00 mm
PIPE MATERIAL
WALL THICKNESS
WALL THICKNESS
004.00 mm
004.00 mm
WALL THICKNESS
007.00 mm
WALL THICKNESS
 COMPLETE 
↓
WALL THICKNESS
LINING MATERIAL
NO LINING
KIND OF FLUID
VISCOSITY
1.0038 E-6m2/s
PROCESS SETTING
S= 31 ( 93mm)
0.000 m/s
0.000 m3/h
PVC
4.00 mm
7.00 mm
WATER