Elitech FreezePoint 6000 Series User Manual page 92

Section 8: Servicing
Figure 128 Move elevator cover up
Figure 129 Remove mounting screws
Figure 130 Remove elevator cover
Figure 131 Pull out printer
4. Move elevator cover up (1).
CAUTION!
Do not leave elevator cover up when raising the elevator. Doing so can
cause risk of instrument damage!
5. Remove the 2 mounting screws (1) using Allen key (SW 2).
6. Remove complete elevator cover (1).
7. Pull out printer from device. (Model 6000P/Model 6000SP only)
92