Elitech FreezePoint 6000 Series User Manual page 82

Section 7: Troubleshooting
Figure 107 Thermistor probe (A) Z axis and (B) XY plane
Install elevator cover
Figure 108 Elevator cover with correct cable routing
CAUTION!
Risk of cable break!
14. Place cable (1 Above) on thermistor probe in cable guide (2 Above) and install elevator cover on
device.
Figure 109 Tighten mounting screws
15. Bolt elevator cover to elevator using the 2 mounting screws (1).
The thermistor probe is now aligned.
16. Move elevator cover down.
82