Elitech FreezePoint 6000 Series User Manual page 124

Installation, Operation, and Performance Qualification
Ancillary Information
The correct measuring vessel
The conic shape of the measuring vessel matches that of the lower cooling system. This ensures a secure
fit, a high standard of centricity for the measuring vessel in the lower cooling system and consistent
immersion depth of the measuring tip in the sample.
When the measuring vessel is placed on the thermistor probe, a soft clicking sound is heard and
there is a tangible resistance. If this is not the case and the measuring vessel does not fit securely,
it is possible you are using an improper measuring vessel and the measurement results may not
be verifiable.
Reused measuring vessels also exhibit these characteristics. This is because their openings are
dilated when they are placed on the sensor.
The customer is expected to use only Gonotec measuring vessels. Gonotec or its representative is not
expected to be able to provide application support with the customer measuring vessels.
Using measuring vessel:
Item Number
SS-275
SS-279
Other:
COMMENTS
..........................................................................................................................................................................
..........................................................................................................................................................................
Date ............................
Completed by ..............................................
Date ............................
Verified by ..............................................
Description
Measurement Vessels,
1000 ea., FreezePoint
Measurement Vessels,
100 ea., FreezePoint
Type:
Date Verified
.....................................................
.....................................................
124