Elitech FreezePoint 6000 Series User Manual page 52

Section 6: Operation
Configure screen saver
Figure 38 Configure screen saver
Activate paper feed (Models 6000P/SP)
Figure 39 Activate paper feed
Set sample and batch ID
Figure 40 Set sample and batch ID
1. Select the duration after which the system activates the screen saver.
Tapping OFF will deactivate the screen saver.
1. Tap Paper Feed.
The paper feed of the printer is activated briefly.
Tap Back to exit the menu.
Select the settings for the IDs for series measurements (Batch ID) and individual
samples (Sample ID). The following options are available:
• Automatic: The samples and the charge IDs are assigned running numbers
automatically. The counter resets daily. The counter for the individual
samples in a series measurement resets when starting a new series
measurement.
• Numeric: Numeric IDs are assigned manually. During measurements, the
system prompts the user to enter the numeric ID of the sample or charge
using the virtual keyboard.
• Alphanumeric: Alphanumeric IDs are assigned manually. During
measurements, the system prompts the user to enter the alphanumeric ID
of the sample or charge using the virtual keyboard.
• None: Do not use IDs for samples and batches.
52