Ancillary Information - Elitech FreezePoint 6000 Series User Manual

Installation, Operation, and Performance Qualification

Ancillary Information

The following information serves for your safety and the faultless functioning of your Osmometer.
While installing the device, the safety-regulations-control is
carried out according to the local or on-site regulations.
Is the transport aid for the thermistor probe removed?
Caution: remove the transport aid very carefully
to avoid damage of the thermistor probe!
Does the power supply meet local requirements
and instrument specifications?
Does the mains voltage correspond to the one indicated
on the back side mounted device label?
Is the power cord properly attached to the rear
power terminal and main power supply?
Is the instrument placed away from direct sunlight?
Is the instrument placed away from a heater and air conditioning units?
Is the fan-discharge duct at the device ground free of objects?
RS232 / USB
Hint: Only one connection at a time is possible. Is the RS232- or USB
cable properly mounted to the Osmometer's COM2 or USB port and
the COM or USB port of the computer according to software settings?
Barcode Reader (Optional)
Is the Barcode reader properly mounted to
the Osmometer's COM1 port?
Printer (Models 6000P / 6000SP)
Is enough print-out paper in the printer?
Is the paper properly inserted?
COMMENTS
..........................................................................................................................................................................
..........................................................................................................................................................................
..........................................................................................................................................................................
..........................................................................................................................................................................
..........................................................................................................................................................................
..........................................................................................................................................................................
..........................................................................................................................................................................
Date ............................
Completed by ..............................................
Date ............................
Verified by ..............................................
Comment
............................ ............................
............................ ............................
............................ ............................
............................ ............................
............................ ............................
............................ ............................
............................ ............................
............................ ............................
............................ ............................
............................ ............................
............................ ............................
Date Verified
118