Section 7: Troubleshooting; Safety Notices; Electrical Current; Risk Of Infection - Elitech FreezePoint 6000 Series User Manual

Section 7: Troubleshooting

7.1 Safety notices

Electrical current

DANGER!
Risk of death due to electrical current on device!
Contact with energized parts of the device results in immediate risk of death due to electric shock.
Damage to the insulation of individual components can cause risk of death.
• Only have qualified personnel perform repair and maintenance work on the device.
• If the insulation is damaged, immediately switch off the voltage supply and schedule a repair.
• Always route the power cable so it is not subject to stress and cannot be bent, pinched, or rolled over
and is not exposed to liquids or heat.
• Ensure easy access to the power socket at all times.
• Keep energized parts away from liquids. Otherwise, electrical shorts may occur.

Risk of infection

WARNING!
Risk of injury due to sample residue and in case of inadequate hygiene, disinfection, and
sterilization procedures!
Exposure to sample residue in non-cleaned, non-sterilized, or non-disinfected components results
in an elevated risk of infection.
• Wear lab gloves during any kind of work.
• Observe all local regulations regarding hygiene, disinfection, and sterilization.

Risk of injury

CAUTION!
Risk of injury from initiation needle!
When installing and removing the initiation needle and the thermistor probe, the tip of the initiation needle
is exposed. Movement of the initiation needle can cause needle puncture injuries.
• Always keep your hands and fingers clear from the area underneath the initiation needle.
65