Elitech FreezePoint 6000 Series User Manual page 34

Section 2: Design and Function
Example of a single measurement
In the case of a single measurement the entire ticket is published in one piece when the measurement has
been completed, the value BatchId does not apply.
<Ticket class="SAMPLE" serialno="300201103" versions="FP6000;Main:VX.
XX;COM:VX.X;D:VX.XX;TEC:VX.X">⏎
<Measurement>⏎
<SampleId>SAMPLE01</SampleId>⏎
<DateTime>YYYY-MM-DDTHH:MM:SS</DateTime>⏎
<Value>299</Value>⏎
<Unit>mOsmol/kg</Unit>⏎
<DeviceCode>300201103</DeviceCode>⏎
<CheckSum>756de7e29897809f575ff41fec1a2435</CheckSum>⏎
</Measurement>⏎
</Ticket>⏎
Example of a batch measurement
If a new batch is initiated, a section is published which opens the ticket as an XML tag in the log:
<Ticket class="BATCH" serialno="300201103" versions="FP6000;Main:VX.
XX;COM:VX.X;D:VX.XX;TEC:VX.X">⏎
If measurements are then implemented within the batch, a Measurement XML tag follows for each
measurement such as the following:
<Measurement>⏎
<BatchId>CHARGE01</BatchId>⏎
<SampleId>SAMPLE01</SampleId>⏎
<DateTime>YYYY-MM-DDTHH:MM:SS</DateTime>⏎
<Value>301</Value>⏎
<Unit>mOsmol/kg</Unit>⏎
<DeviceNo>300201103</DeviceNo>⏎
<CheckSum> ff524ddb8bf30e3b3bb58d59beed1975</CheckSum>⏎
</Measurement>⏎
Ending the batch also closes the ticket:
</Ticket>⏎
Legacy CSV format
Select only if required for compatibility with existing LIMS connections configured accordingly.
Documentation in the obsolete CSV format can be requested separately.
We strongly advise against using this format!
34