Installation and Operator's Manual
(PVI-3.0/3.6/4.2-OUTD-x-US Rev: 2.1)
2) Contrast: display light contrast
Available display light tones go from 0 to 9.
Press UP and DOWN to scroll numbers and then press ENTER to confirm.
3) Buzzer: key tone setting
Selecting:
ON: key tone on
OFF: key tone off
5.5.7.3
Service
Only installing staff can gain access to this function, which is password-protected and
dedicated code is supplied by Power-One.
5.5.7.4
New Password
This function is used to change the default password 0000.
To set your personal code, use the display keys as follows:
Use ENTER to move from one digit to the next (from left to right)
Use ESC to go back to the previous digit (from right to left)
Press ESC repeatedly to go back to the previous menus as described in
section 5.5.3
Press DOWN to scroll numbers backwards (from 9 to 0)
Press UP to scroll numbers from 0 to 9
5.5.7.5
Cash
This function is about energy output savings.
Name: set desired currency, using keys as usual. Default currency is US Dollar.
Val/KWh: it indicates the cost of 1 KWh expressed in set currency. Default setting is
0.50 Euro.
5.5.7.6
Time
This function allows time and date setting.
Name
$
Val/KWh
00.50
Time 14:21
Date 17 May 2006
Page 74 of 108
Need help?
Do you have a question about the AURORA PVI-OUTD-US Series and is the answer not in the manual?
Questions and answers