Table of Contents
Advertisement
Installation and Operator's Manual
(PVI-3.0/3.6/4.2-OUTD-x-US Rev: 2.1)
ASSEMBLY
•
Devices should be assembled and cooled according to the specifications
mentioned in their corresponding documents.
•
In particular, during transport and handling, parts should not be bent and/or the
insulation distances should not be changed. There should be no contact between
electronic parts and connection terminals.
•
Electrical parts must not be mechanically damaged or destroyed (this could cause
potential health risks).
ELECTRICAL CONNECTION
•
Always comply with all prevailing national accident-prevention regulations.
•
Electrical connections such as conductor sections, fuses, PE connection, etc., must
always be made in accordance with applicable regulations..
OPERATION
Systems with inverters should be provided with additional control and protective
devices in compliance with the corresponding prevailing safety rules, such as those
relating to the compliance with technical equipment, accident-prevention regulations,
etc.
•
Comply with all corresponding marks and symbols present on each device.
•
Ensure that all covers and doors are closed during operation.
•
Any calibration changes should be made using the operational software.
•
Anytime that the inverter has been disconnected from the power grid, powered
parts and electrical connections should not be touched as some capacitors could
still be charged.
MAINTENANCE AND SERVICE
Contact Power-One Customer Service for maintenance and service needs.
SAVE ALL DOCUMENTS IN A SAFE PLACE!
Page 5 of 108
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AURORA PVI-OUTD-US Series and is the answer not in the manual?
Questions and answers