Table of Contents
Advertisement
Available languages
Available languages
Use and installation manual
(PVI-10.0/12.0-I-OUTD(-S)-400 Rev:1.3)
5.5.6.3
Service
Only installation staff may access this function. A dedicated password, only
supplied by Power-One is necessary to gain access.
5.5.6.4
New password
This function is used to change the default password, 0000.
To enter your own personal code, the display keys must be used in the following
way:
Use ENTER to scroll from one digit to another (from left to right)
Use ESC to return to the previous digit (from right to left)
Press ESC repeatedly to return to the previous menus, as described in
chapter.5.5.3
Use DOWN to scroll through the numbers in descending order (from 9 to
0)
Use UP to scroll through the numbers in ascending order (from 0 to 9)
5.5.6.5
Currency
This function regards the energy output earnings.
Name: set the desired currency, using the keys as described above. The default
currency is the Euro.
Val/KWh: indicates the cost of 1 KWh expressed in the set currency. The default
setting is 0.50 Euros.
5.5.6.6
Date/Time
The time and date can be modified from this section, if necessary.
5.5.6.7
Language
It is possible to set one of the following languages: ENGLISH, GERMAN,
ITALIAN, FRENCH, SPANISH, CZECH.
Name
EUR
Val/KWh 00.50
Time 14:21
Date 17 May 2006
English
Italian
67
97
Page
of
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Aurora PVI-10.0-I-OUTD-S-400 and is the answer not in the manual?