Power One AURORA PVI-OUTD-US Series Installation And Operator's Manual page 66

Installation and Operator's Manual
(PVI-3.0/3.6/4.2-OUTD-x-US Rev: 2.1)
10A)
Vin2: Instant input voltage measured at channel 2 input
Iin2: Instant input current measured at channel 2 input
Or:
In a configuration with one input connected and a second input connected in parallel,
this screen is shown instead of the 2 screens described in 9A) and 10A)..
11A)
Pin1: Measured instant input power of channel 1
Pin2: Measured instant input power of channel 2
In a configuration with one input connected and a second input connected in parallel,
this screen is shown instead of the screen described in 11A)..
12A)
Riso: Measured insulation resistance. Unlike the parameters discussed above, this is
not an instant value but a one-of-a-kind measurement taken upon inverter start-up.
Vin2 0 V
I in2 0.0 A
Vin 0 V
I in 0.0 A
Pin 1 0 W
Pin 2 0 W
Pin 0 W
Riso 0.0 Mohm
Ileak 73 mA
Page 66 of 108