Installation and Operator's Manual
(PVI-3.0/3.6/4.2-OUTD-x-US Rev: 2.1)
5.5.6.2
Partial
Select Partial to view the following information:
Time: Total operation time since counter was last reset *
E-par: Total energy output since counter was last reset *
PPeak: Maximum peak power measured since Partial counter was activated
Val.: Money earned since counter was last reset *
CO2: CO2 saving compared to fossil fuels since counter was last reset *
* Hold the ENTER key (4th key from display) depressed for over 3 seconds to reset all
counters in this submenu. After 3 seconds, a warning sound is repeated 3 times.
5.5.6.3
Today
Select Today to view the following information:
E-tod: Total energy output during the day
Ppeak: Peak power achieved during the day
Val: Money earned during the day
CO2: CO2 saving compared to fossil fuels during the day
5.5.6.4
Last 7 days
Select Last 7 days to view the following information:
E-7d: Total energy output during the last 7 days
Val.: Money earned during the last 7 days
CO2: CO2 saving compared to fossil fuels during the last 7 days
Time
h
E-par
KWh
Ppeak
W
Val.
$
CO2
lb
E-tod
KWh
Ppeak
W
Val.
$
CO2
lb
E-7d
KWh
Val.
$
CO2
lb
Page 69 of 108
Need help?
Do you have a question about the AURORA PVI-OUTD-US Series and is the answer not in the manual?