Maintenance And Care; Cleaning The Housing - FP PostBase Vision Reference Manual

18

Maintenance and care

Have your franking system cleaned and serviced regularly by an authorised Service
staff. This guarantees long-term, trouble-free operation. Ask about available mainte-
nance agreements.
You can do the following work yourself:
– Clean housing exterior
– Clean sensors
– Clean print system
– Change ink cartridge
– Replace transport brush
– Calibrate touch screen
– Filling with sealing fluid (feeder / sealer)
– Clean / replace moistening sponge (feeder)
– Clean / replace moistening brush (feeder)
– Clean / replace felts (sealer).
18.1

Cleaning the housing

Warning! Electrical hazard. Disconnect the power plug before cleaning the
franking system.
Warning! Electrical hazards due to short circuits. Be extremely careful when
handling fluids. Take special care that no foreign objects penetrate the sys-
tem's interior. If this should happen, have the franking system checked by FP
Customer Service before using it again.
• Turn PostBase Vision off.
• Pull the power plugs of the franking machine
3 seconds
• Clean dirt from the housing with a slightly
and of all peripherals such as the feeder
out of the outlet.
damp cloth. You can also use a commer-
cially available dishwashing detergent.
Maintenance and care
127