Postbase Vision Feeder (Optional); Filling With Sealing Fluid - FP PostBase Vision Reference Manual

144
PostBase Vision

PostBase Vision Feeder (optional)

18.9
18.9.1

Filling with sealing fluid

We recommend using the SEALIT sealing fluid. This special sealing fluid is available
from FP or an authorised FP dealer.
Warning! Electrical hazards due to short circuits.
Be extremely careful when handling fluids. If you fill the sealant tank, make
sure not to dampen any parts connected to electronics. If this should happen,
immediately pull the power plugs. Have the PostBase Vision franking system
checked by the Customer Support before using it again.
• Switch the franking system off.
3 seconds
The sealant tank is located under the trans-
parent flap. To open the flap:
• Press the key.