FP PostBase Vision Reference Manual page 32

32
PostBase Vision
Step 7: Installing the PostBase Vision Feeder (optional)
3 seconds
Ramp
Caution! Only connect the Feeder once the
PostBase Vision franking machine is fully
installed. Otherwise the PostBase Vision will
not recognise the feeder. The franking sys-
tem will not work.
Turning off the franking machine
• Press the ON/OFF button for three
seconds.
The PostBase Vision will complete any cur-
rent actions, return the display to its home
position, and then turn itself off.
Setting up the feeder
Feeder
• Place the ramp, feeder and franking
machine as shown in the illustration above.
• When assembling, ideally proceed from
left to right (starting at the ramp).
PostBase Vision
franking machine