FP PostBase Vision Reference Manual page 121

Connectivity Settings and their meaning:
Connection Type
E / LAN
THERNET
(default setting)
W -F
I I
SSID
S W -F
ELECT I I
E SSID
NTER
Advanced settings & system information
• Now, follow the information and instructions
on the display step-by-step. Configure the
appropriate parameters for your network. If
necessary, ask your network administrator.
PostBase Vision displays the selected
connectivity settings.
• Once everything is correct: S
The following table gives an overview of the
possible settings and parameters.
LAN (Local Area Network) connection.
Use this setting if you want PostBase Vision to
use the wired connection to your local network /
router.
Use this setting if you want PostBase Vision to
connect to the local network / router wirelessly.
Service Set Identifier. Name of a local wireless
network (such as router name).
Select the desired access point from the list of
detected Wi-Fi networks.
If the name of the desired network does not
appear in the list, select this option.
You must then enter the following parameters:
– Network name
– Select Encryption Mode (WPA2, WPA) or
Open Network.
Please contact your network administrator for
details.
121
.
AVE