Access Control / Administrator Pin - FP PostBase Vision Reference Manual

16.3

Access control / Administrator PIN

You can protect the PostBase Vision franking system from unauthorised use with a
PIN, the administrator PIN. If access control is enabled, PostBase Vision requests a
PIN to be entered when the system is turned on or wakes up from stand-by mode.
Advanced settings & system information
Setting up access control
• Open the M .
ENU
• Choose M
ANAGE
• Follow the instructions on the screen.
You must enter a four-digit PIN and enter it
a second time for verification.
S activates the access control.
AVE
You need this administrator PIN in the cus-
tomer portal as well to set up a user-specific
access control for your franking system.
Disabling access control
• Open the M .
ENU
• Choose M
ANAGE
• Turn off access control by tapping Y
If a user-specific access control is set up in
the customer portal for your franking system
as well, the 'Manage Pin' menu function can
only be accessed with the Administrator PIN.
A PIN.
DMIN
A PIN.
DMIN
111
.
ES